HIGH QUALITY, BEST SERVICE,REASONABLE PRICE.
 |
| Place of Origin: | Ningbo,China |
| Brand Name: | VAINO |
| Certification: | CE/ISO9001:2000 |
| Model Number: | K3-100 |
| Minimum Order Quantity: | 1SET |
|---|---|
| Packaging Details: | Wooden pellet Wooden case(optional) |
| Delivery Time: | 15-25 working days after confirm order and received deposit |
| High Light: | hydraulic injection molding machine,vertical injection moulding machine |
||
|---|---|---|---|
Power Saving High Speed Injection Molding Machine for PP syringe
Enviromental protection-high energy saving
High performance energy saving result realized the reduction of cost
Not only save energy, but also realized the precise speed and pressure control
High efficiency, lower oil temperature ,make oil talk much smaller, extend the use of hydraulic oil and elements
HIGH ENERGY SAVINGS
Under normal operating conditions,compared with conventional hydraulic injection molding machines,energy saving of 20-80% can be achieved.
MOLDING STABILITY
Compared with conventional injection molding machines,repeatability is greatly improved due to ervo motor closed-loop control
QUICK RESPONSE
Featuring a dynamic servo motor with a response time of only 0.05sec
QUIET OPERATION
Machine runs much lower noise levels, particularly in low speed applications
RELIABLE HOLDING PRESSURE
Compared with traditional hydraulic machine,the holding pressure is more stable and does not have limitation
BETTER OIL TEMPERATRURE STABILITY
The servo system only delivers hydraulic oil as it is needed for the various functions,This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
| SPECIFICATION | ||||
| MODEL | ||||
| Description | UNIT | K3-100 | ||
| INJECTION UNIT | ||||
| Shot volume | Cm³ | 141 | 178 | 220 |
| Shot weight(ps) | g | 129 | 164 | 202 |
| Shot weight(ps) | Oz | 4 | 5.8 | 7.1 |
| Screw diameter | mm | 32 | 36 | 40 |
| Injection pressure | Mpa | 249 | 196 | 159 |
| Injection rate | g/sec | 60 | 87 | 107 |
| ScrewL/D ratio | 23.6 | 21 | 19 | |
| Screw stroke | mm | 175 | ||
| Screw speed(stepless) | Rpm | 0～214 | ||
| Nozzle contact force | ton | 3.5 | ||
| Clamping force | ton | 100 | ||
| Opening stroke | mm | 350 | ||
| Platen size | mmxmm | 550X550 | ||
| Space between tie bars | mmxmm | 375X375 | ||
| Max.daylight | mm | 750 | ||
| Mold thickness(min.-max.) | mm | 150-400 | ||
| Hydraulic ejection stroke | mm | 110 | ||
| Hydraulic ejection force | ton | 3.1 | ||
| Ejector pin | Unit | 5 | ||
| POWER UNIT | ||||
| Hydraulic system pressure | Mpa | 16 | ||
| Pump motor | Kw | 11 | ||
| Heating capacity | Kw | 7.5 | ||
| Number of temp control zones | Unit | 4 | ||
| Oil tank capacity | L | 230 | ||
| Machine dimensions | mxmxm | 4.55X1.15X1.8 | ||
| Machine weight | ton | 3.7 | ||
Configurations
|
Name |
Configuration |
|
Controller |
KEBA-Austria (8 inch) |
|
Linear Motion Guide |
HTPM--- China |
|
Linear Transducer |
WOOG---Hongkong/ OPKON---Turkey |
|
Hydraulic Motor(charging material) |
INTERMOT-CHINA ITALY JOINT VENTURE |
|
Directional Valve |
NORTHMAN---Taiwan |
|
Main Switch |
LG---South Korea |
|
Single pole Switch |
ANDELI |
|
Proximity Switch |
YINGKE |
|
Seals |
NOK---Japan |
|
Pressure Gauge |
DMASS-Germany |
|
Limited Switch |
SCHNEIDER---France |
|
Oil Hose |
MNULI---Italy/ SW---Italy |
|
Adjustable Motor |
INTERMOT-CHINA ITALY JOINT VENTURE |
|
Lubrication Device |
HERG---Japan |
ADDITIONAL FUCTION
|
Voltage |
415v 50hz 3phase 4line |
|
Hopper with lid material |
SS(stainless) |
|
Alarm system |
Light shining with sound |
|
Heating elements |
SSR |
|
Heating band quality |
Infrared |
|
Condenser |
One middle bigger |
|
Core pull function |
3 hydraulic+3pheumatic |
|
Machine program |
Keba program with 3hydraulic ,3 pheumatic core pull changable |
|
Injection cylinder |
2 |
|
Servo system |
Drive-Huichuan Motor-Saisi-China Gear pump-Sumitomo-Japan Pressure sensor-KAVLICO |
|
Center lubrication system and Manual |
Both |
|
Lubrication pipe |
Plastc pipe with spring protection |
|
Lubrication distribute |
Auto jam detector distribute |
|
Machine bush elements |
Copper |
|
Loading and un-loading care |
For machine lifting purpose, properly positioned and clearly marked ‘hooks’ to be provided. |
|
Voltage stabilizer for PLC |
1000VA |
